EML 电吸收调制光发射机评估板 10G/40Gbps


本电吸收调制光发射机评估板可用于诸如-NRZ/OOK 光信号的生成. 主板集成了EML激光器, 温度和功率恒定控制,  单电压供电, 超小的尺寸, 极简的用户界面, 使得它非常适合实验和开发人员在实验室调试或二次开发使用, 且极具性价比.

DESCRIPTIONEAM Laser Transmitter-2

The EML (Electro-absorption Modulated  Laser) transmitter evalsuation board consists of a conventional Distributed Feed-Back (DFB) laser and EA modulator. The modulation signal is applied to the modulator section while the laser section operates CW allowing extremely low wavelength chirping. The module includes an optical isolator, monitor photodiode, thermistor and a thermo-electric cooler.

FEATURES

Dynamic extinction ratio >=10 dB
Low drive voltage
Up to 20km transmission capability

APPLICATIONS

Optical transmission
Microwave photonics
Testing and measurement

Parameter Unit Min. Typ. Max.
Operating Wavelength nm 1550
Wavelength Accuracy nm 2
3dB Electrical Bandwidth GHz 10 32
DC On/Off Extinction Ratio dB 15 18
Dynamic Extinction Ratio dB 10
Optical Power dBm 0 5 7
Optical Isolation dB 25 30
Side-mode Suppression Ratio dB 30
Maximum Data Rate Gbps 10 40
EA Modulator DC Offset V 0 -1
RF Drive Voltage Swing Vpp 2.7
Modulation Format/Application NRZ/OOK
Adjustable Parameter Optical Power ; TEC Temperature ;
Adjustment Interface Trimming Potentiometer, Manual
Receiver Option Board Integrated Photo-Receiver
RF Input Port GPO Male, or GPPO Male
Optical Fiber @Output SM28-e, FC/APC
Operating Temperature 0 ~50
Power supply* DC12V, 0.5A (EVB)
Dimensions  (L×W×H)* mm 96×96×30 (EVB)

Notes:

*The specifications subject to change without notice.

*The appearance and the key component varies  according to different performance requirements.